MEASURE THE WEIGHT OF THE GOODS AT THE PLACE OF STORAGE
By using the Forkmaster hydraulic forklift scale, it will be possible to accurately measure the weight of the goods on the fork at the place of storage, It allows you to load trucks accurately without the need to adjust the total weight of the load in the event of an overweight, while the truck is running at maximum capacity and you have to no longer worry about fines due to axle load. You can use it to document material movements. A modem (which is optionally a printer or a data modem) can be attached to the forklift scale. It can be used on forklift trucks, as well as on mast and high-lift versions. The measuring range is the same as the lifting capacity of the forklift, and the scale interval is freely adjustable between 5kg and 50kg..
These are the accuracy classes.
The STANDARD version has +/-2% accuracy, the PRO version has +/-0.5% accuracy which is acived with a controlled hidraulics vale.
It is an easy to operate, simple forklift scale.
Each loading becomes measurable. Transport efficiency is improved, and transport costs are reduced.
The main functions required for operation are directly accessible without the need for the operator to navigate through the menus.
The wireless transmission of measurement data enables a detailed reporting and by this you can obtain accurate information about loading, goods stock, in- and outgoing shipments.
The measured results are automatically summed up and then, at the touch of a button, can be cleared at the end of the loading process, and the balance sheet can be printed.
The graphical screen and the buttons both have background light which helps you work in the dark.
High speed thermal paper printing, a durable solution that is less sensitive to dust and other dirt than a needle matrix printer. Changing the paper is easy and does not require adjustment. The paper cover can be opened with the touch of a button; it is a durable solution.
Using high-precision pressure transducers and 32-bit sampling, accuracy is limited only by the condition of the machine, which is typically within the range of 0,5-2%.
The simplicity and good design of the truck balance makes it as easy to use as possible. The machine operators can be familiar with the balance from the very first minute.
The indicator is equipped with a high quality, high-brightness digital graphic display. This allows you to display the data in detail.
The balance has a date and time display function. These balance marks are printed on the balance sheet when printed. The built-in battery does not need to be replaced for a long time.
Ideal where there is a built-in WiFi network. The truck balance is connected to the network in seconds and already transmits weight data to a selected computer, where this data become stored in an SQL database. By means of using digital data transmission, we can prevent data transmission error.
Ideal for short distance, on-site use. Together with additional radis, the measurements in a remote locationcan be printed on site, immediately at after loading or sending the measurement results to a computer, where this data become stored in an SQL database.
Stay connected around the clock with your loader! The GSM module sends the data immediately, you do not need anything other than an available mobile internet connection. The data is sent to the selected computer where it is stored in an SQL database.
The measurement is based on the pressure of the lifting cylinder of the hydraulic lift truck, which is measured by the pressure sensor. The weight is raised to the marked measuring point and then released 5-10 cm from there.
Mounted in the cab, with printer or data transfer.
The hydraulic sensor measures the lift cylinder pressure, which is the basis for measurement.
|
Size |
140x100x400 mm. |
|---|---|
|
PWR Supply |
12-36VDC, 12-60VDC (opcionális konverterrel) |
|
Keys |
4 keys with backlight |
|
Display |
70mm x 30 mm LCD display, 128x64 pixel |
|
Resolution |
32-bit A/D converter, 8 chanel |
|
Input |
350ohm Loadcell or |
|
Serial port |
2db |
|
Mounting |
Double ball arm |
|
I/O |
2 inputs, optional output modul |
|
Clock |
Bulit-in Real time clock with battery |